Awasome Diy Planter With Pole For String Lights Ideas. Secure the poles in the planters. Next, we grabbed eight foot 4×4's for each planter.
The concrete should fill about 1/2 to 3/4 of the barrel to provide enough stability for the posts. These will serve as the main frame of the planter box. Pour concrete to create solid foundations.
Materials (4) 1X4X8 Common Board.
Here is what you will need: Next, we grabbed eight foot 4×4’s for each planter. Once ready, pour the concrete mix into the planter until it fills the planter halfway.
Again, I Mitered The Edges And Dry Fit The Boards, Then Went Back Over With Wood Glue And My Brad Nailer.
Set the barrel in place; Secure the poles in the planters. I really enjoy the ambiance of having the backyard lit up with string lights at night.
The Pole Started To Bend Under The Weight Of Too Many Lights.
I installed “l” brackets onto the bottom of each 4×4 and then screwed them into the bottom of the planters before adding the cement: Diy pole planters & string lights 1. After the hole was drilled, i added the topper.
With All The Slats Attached, I Realized That The Top Edge Of The Planter Looked A Little Sloppy.
Secure the poles in the planters. String light planter pole supplies. How to make sturdy diy string light cement planters to hold heavy outdoor string lights.
Insert The Metal Pole Into The Umbrella Stand So The Pole Is Standing Upright.
Drainage rock, we used about half of large back of drainage rock per planter, making it about 2 to 3 inches deep on top of the. Drill holes into the bottom of barrel for drainage. We went with the tall/skinny planters for space issues, as well as the thought that the slim design and height would allow for our poles to sit a bit higher as well.